GSM Prime Tool 2024 Download Now [Free]

The GSM Prime Tool is a versatile utility designed specifically for Samsung smartphones, supporting both Qualcomm and MTK (MediaTek) processors. This tool is used to bypass or remove FRP (Factory Reset Protection) locks from Samsung devices. Bypassing and removing FRP are distinct processes:

bypassing involves using security loopholes, while removing FRP erases data from a specific partition, which may carry some risks. However, the GSM Prime Tool offers a fast and easy solution, allowing you to perform these operations with just a single click. For Qualcomm-based devices, it’s necessary to boot into 9008 EDL (Emergency Download) mode, and for Samsung devices, a modified USB cable is often used. On MTK phones, simply pressing both the volume down (VOL -) and volume up (VOL +) buttons while the device is off and connecting it to the PC should do the trick. Additionally, to bypass MTP (Media Transfer Protocol) mode, you can use the #0# code on your Samsung phone.

Key Features of GSM Prime Tool:

MTP Mode & Download Mode Support: Compatible with Samsung devices in these modes.
Samsung MTK FRP (Odin): Allows flashing firmware and removing FRP on MediaTek-based Samsung devices.
Samsung FRP (MTP): Bypass FRP in MTP mode using a simple code.
EDL Mode for Qualcomm: FRP removal on Qualcomm devices via EDL mode.

Supported Samsung Models:

The GSM Prime Tool supports various Samsung models, including:

Custom Loader Models:

SM-A015F
SM-A025F
SM-A115F
SM-A705F
SM-J415F
SM-J610G
SM-M015G
SM-M025F
SM-M115F

Samsung 4 File Flasher:

BL, AP, CP, CSC file flashing support.

How to Install the GSM Prime Tool:

Download the Tool: Use the download link provided.
Disable Antivirus: Temporarily disable your antivirus to avoid conflicts during installation.
Install the Tool: Run the setup file and follow the on-screen instructions. A shortcut will be created on your desktop.
Launch the Tool: Right-click the shortcut and select “Run as Administrator.”
Start Server: Click on “Start Server” to launch the tool interface. Select the method based on your phone’s processor (MTK or Qualcomm).
Step-by-Step Instructions to Remove FRP Using GSM Prime Tool:

For Samsung Devices with MTK Processors:

Download and Install the Tool:

Download the GSM Prime Tool and install it after disabling antivirus software.
Open the tool as an administrator.

Prepare the Device:

Power off the Samsung device.
Hold both the VOL- and VOL+ buttons simultaneously.

Connect to PC:

While holding the buttons, connect the device to your PC via USB cable.
The device will now enter the required mode for FRP removal.

Use the Tool:

Open GSM Prime Tool, click on “Start Server.”
Select the "Samsung MTK FRP" option from the interface.
The tool will begin the FRP removal process.

Complete the Process:

After completion, your device will reboot, and the FRP lock will be removed.

For Samsung Devices with Qualcomm Processors:

Download and Install the Tool:

As before, download and install the GSM Prime Tool.
Open it as an administrator.

Enter EDL Mode:

To enter 9008 EDL mode, use a modified USB cable or device-specific button combinations.

Connect to PC:

Once the device is in EDL mode, connect it to the PC using a USB cable.

Use GSM Prime Tool:

Open the tool, click "Start Server."
Select the "Qualcomm FRP" option.
The tool will detect your device and start the FRP removal process.

Complete the Process:

Once the tool finishes, your device will reboot with the FRP lock removed.

For Samsung Devices with Exynos Processors (MTP Mode):

Download and Install the Tool:

Download and install the GSM Prime Tool.

Activate MTP Mode:

Ensure your Samsung device is in MTP mode (choose "File Transfer" or "MTP" when connected to the PC).

Use GSM Prime Tool:

Open the tool and click "Start Server."
Select the "Samsung FRP (MTP)" option.
Enter #0# on the emergency dialer to enter test mode.

Bypass FRP:

Make sure USB debugging is enabled.
The tool will bypass the FRP lock using MTP mode.

Complete the Process:

Once finished, your device will be FRP unlocked and ready for use without Google account verification.

Conclusion:

The GSM Prime Tool offers a comprehensive solution for bypassing or removing FRP locks on various Samsung devices, whether they are powered by Qualcomm, MTK, or Exynos processors. Its one-click operations make it easy to use, and it supports a wide range of Samsung models. Just ensure you follow the correct steps for your device’s processor to avoid issues during the process.

GSM Prime Tool 2024 Download Now [Free]